In the last article we have known something of the fiber optic splice closure form the fiber optic manufacturer in china,and now i will tell you the ways of installing it corretly.
 
The first step is to make fiber ready which can be divided into 2 parts.
1. Remove the cable sheath, (if there is, please remove the shield and armor) and then wrap each layer to remove the loose sleeve, revealing the specific method, please press the cable manufacturer's recommended standard method steps, prepare length 3m.
2, with a detergent to clean loose tube and strengthen the core sheath, remove excess filling casing, cable sheath 150mm long polished with sandpaper to offer.
 
The second thing have to do is cable installation after you do fiber optic adaptor wholesale or other products have bought.This step is so important,there are a lot of things to do,we can see the following details.
1, according to the cable diameter to select the minimum inner diameter of the seal ring, and two sealing ring on the cable.
2, will be placed in the appropriate cable into the hole.
3, shielding and grounding connections. Splice closure is an important product for the fiber optic cable supplier get more business,beacuse the closely relationship between cable and splice.
4, between the two sealing rings is wound on the self-adhesive sealing tape, the sealing tape around the outer diameter of the sealing ring is flush to form a cable sealing end.
5, sealing the cable end into the cable then set it into the hole.
6, with hose clamps through the cable holder and the core reinforcement bracket, the cable connector box fixed on the base, tighten the screw hose clamps, hose clamps until tightening up.
7, on the cable tie nylon cable ties, cut excess length.
8, the remaining unused cable holes, please sealing plug. The same block head wound sealing tape, the same requirements and 5.2.4.
9, the reinforcing member is wrapped around the splice tray holder of countersunk screws, and pressed.