Fiber optic manufacturer in china tell you that fiber optic adapter can be inserted into the ends of different types of fiber optic connector interfaces to achieve the conversion between different interfaces FC, SC, ST, LC, MTRJ, MPO, E2000, widely used in optical fiber distribution frame (ODF), fiber optic communications equipment, equipment, etc., superb performance, stable and reliable. Some of the fiber adapter on the market, also known as fiber optic connectors, in fact, these are two different products.
 
The optical fiber is connected by adapter sleeve openings through its internal, in order to ensure maximum connectivity between fiber optic connectors. In order to fix the various panels, also designed a variety of fine fixed flange. Conversion adapter can be connected to different interfaces at both ends of the optical fiber connector types, and provides a connection between the faces APC. Duplex or associated adapter can improve mounting density, saving space.
 
Depending on the fiber optic connectors, fiber optic adapter may be provided corresponding to the optical connector adapter member.Know carfully to make fiber optic adaptor wholesale.
Applicable models fiber connectors FC, SC, ST, LC, MTRJ, E2000, etc.
Suitable optical fiber connector end surface has PC, UPC, APC and the like.
 
SC is on behalf of Standard Connector.
ST is representative of Straight Tip.
FC is the representatives for Fiber Connector.
"/" Indicates the front part of the optical fiber connector suitable models.
"SC" connector is a standard rectangular connector, with plastic, with a high temperature, the advantage is not easy to oxidation. Transmission equipment sidelight SC connector interface for general use.
"LC" connectors with SC connectors are similar in shape, smaller than the SC joint.
"FC" connector is metal joints, usually in the ODF side using pluggable connectors to the number of metal than plastic.
Connector models are more varieties, in addition to the three described above, there MTRJ, ST, MU.
/ "Indicates that the fiber connector section behind the process, namely the grinding way.
"PC" in the telecom operator's equipment in the most widely applied, the connector section is flat.
"UPC" attenuation than the "PC" to be small, generally used with special needs equipment, some foreign manufacturers jump fiber ODF of internal use is FC / UPC, primarily to improve the device itself ODF indicators.
"APC" said the oblique angle of 8 degrees polishing, and early in the CATV broadcasting in many applications is the "APC" model, which uses the end face with pigtails head angle, you can improve the quality of television signals, mainly because the TV signal analog optical modulator. That is the amazing of fiber optic cable supplier. when the joint coupling surface is vertical when the reflected light back along the original path. Because of the uneven distribution of the refractive index of the optical fiber coupling will once again return to the surface, although this time the energy is small, but because of the analog signal is not completely eliminate the noise, it is equivalent to the original definition signal superimposed with a weak signal delay, performance on the screen is ghosting. Pigtail headbands can dip along the reflected light does not return to the original path. General digital signal is generally no problem.